|
|
 |
Power supplies
We are offering three power supplies models models used in our high energy lasers - one is for for master oscillator, other two - for 12 and 20 millimeters rods pump chambers, respectively. | | Geola power supplies parameters | | Parameter | Values | | | Master Oscillator | First amplifier
| Second amplifier
| | Maximal capacitor bank charging voltage UMAX (RS232 or RS485) | 300 – 1000 V | 1000 – 2300V | 1000 – 2500V | | Maximal pulse output energy at UMAX | 150J | 1500J | 2500J | | Output voltage stability | ±0.5V | ±1V | ±1V | | Pulse width (on the 1/3 level) | 350µ | 450µ | 450µ | Range of pulse repetition rate adjustment (RS232 or RS485) | 0.1-3 Hz | Once per 2min | Once per 2min | | Triggering voltage | 18 kV | 22kV | 25kV | | Unit Triggering mode (RS232 or RS485) | Internal/External | External | | Simmer | Yes | No | | Sync In at 50 Ohm | 10V | | Flash lamps type | NL7054 | INP13-250 | INP16-250 | | Mains voltage | ~ 220±20V AC 50/60Hz | | Cooling | Forced air by fan | | Pulse Counters | Yes | | Voltage regulation | On the front panel of each unit via rotation knob with value display | | Horizontal size of each unit | For standard 19’’ rack cabinet |
| | |  | | |  | | | | 
© Geola Digital uab. Reproduction is illegal without prior agreement. |
|
|
|
|
|
|
